Headway LifePO4 38120S 3.2V 10Ah
Headway 38120S LifePO4 Cell 3.2V 10Ah with screw terminal & high discharge rates. The cylindrical Headway cells are widely used in EVs including electric bikes, electric scooters, electric cars / hybrid electric cars, UPS batteries, storage batteries for solar power systems, starter batteries for cars & motorbikes etc.
Delivery policy (TNT)
Return policy (14 days)
This is a new 38120 Headway cell from storage.
This cell was produced in 2016.
Nominal capacity: 10,000mAh
Initial internal impedance: < 6 mOhm
Cycle life: 2,000 cycles 80%DOD 1C to 80% SoH.
Diameter: 38 mm
Length: 122 mm
Weight: 346 g
Energy density: 105 Wh/kg
Power density: 850 W/kg
Voltage nominal: 3.2V
Charge voltage cut-off: 3.65V
Discharging cut-off: 2.0V
Maximum Charging Current: 20 Amps
Maximum Discharging Current (continuous): 30 Amps
Maximum Discharging Current (10 sec.): 100 Amps
Operation temperature: Charge 0-45 *C, Discharge -20 to + 60 * C
When tightening screw ends, Headway specifies tightening to 3Nm and maximum torque should not exceed 4Nm otherwise the cell could be damaged.
Warning - You should only attempt to construct your own battery pack if you have suitable electrical knowledge. If you have no electrical experience we would recommend you consider purchasing a complete battery pack.
Note: Batteries have special shipping requirements. Please contact us for a custom shipping quote when ordering batteries.
No customer reviews for the moment.
The structure of the Battery Pack One battery module consist of 24 cell, to create a battery pack these modules are put together, the number of the modules put together depends on the size of the battery needed. In the ID.3 12 battery modules are put together via battery connector to form a battery pack system, and to get a 408V DC. in a normal...