No supplier
Reference: CAR155AUTO0400S
4mm² orange shielded cable *pay per meter!
Reference: Gigavac GV200MA
Brand: GIGAVAC
Gigavac GV200MA Contactor - 12V Internal Economizer
Reference: SimpBMS
Battery Management System (BMS) Features An interface that can function as a monitoring and / or control solution for Yuasa LEV40-8 modules and Mitsubishi Outlander PHEV packages, BMW i3, VW E-Golf and GTE modules, and Tesla Model S / X (see manual for know the features available with these modules).
Reference: CAR155AUTO1000S
10mm² orange shielded cable *pay per meter!
Banner
The 70 / 6E2 pump shown here is manufactured specifically for electric vehicles by MES Switzerland. The 70 / 6E2 has very low levels of noise and acoustic vibration and barely noticed during operation. The vacuum is controlled by an integrated control circuit consisting of a vacuum sensor and a solid-state vacuum switch. The 70 / 6E2 has an absolute pressure switch and will keep the preset vacuum level cycle on and off by itself between -600 mbar (17.7 ″ Hg) and -650 mbar (19.2 ″ Hg).
Security policy
Delivery policy (TNT)
Return policy (14 days)
The power required is 12…15 volts DC directly supplied to the pump all the time, no external switches needed. The vacuum level and hysteresis are not user adjustable and are set at the factory to restore the standard vacuum level regular vacuum assisted power brakes in conventional vehicles are designed for. These pumps also will easily replace the vacuum source in regular vehicles if their stock vacuum pump or intake system no longer function. The vacuum booster tank will decrease frequency of on and off cycling, but is not required for proper operation and will not affect wear or life time of the pump. Without tank the pump will likely pump down every time the brakes are actuated, but there is no impact on the brake operation. Optional mating connector included. 1 year warranty.
| 12 VDC nom. | |
| < 5 A | |
| < 6 sec | |
| -0.65 bar | |
| 0.05 bar | |
| < 58 dBA | |
| 190 mm x 190 mm x 118 mm | |
| 1.4 kg | |
| Integrated absolute pressure vacuum switch; switch bypass diagnostic mode |
No customer reviews for the moment.
Reference: VPS-EVP
Pressure switch for EV power brakes vacuum pump
Reference: 8TG009 428-087
The cost savings and energy advantages of conventional brake systems equipped with a pneumatic brake booster can also be applied to advanced vehicle technologies such as future downsized engines and hybrid/fuel cell vehicles by incorporating a vacuum pump. These pumps are able to supply the necessary vacuum independent of the engine technology. The UP28...
The 70 / 6E2 pump shown here is manufactured specifically for electric vehicles by MES Switzerland. The 70 / 6E2 has very low levels of noise and acoustic vibration and barely noticed during operation. The vacuum is controlled by an integrated control circuit consisting of a vacuum sensor and a solid-state vacuum switch. The 70 / 6E2 has an absolute pressure switch and will keep the preset vacuum level cycle on and off by itself between -600 mbar (17.7 ″ Hg) and -650 mbar (19.2 ″ Hg).
